ᓴᓇᒃᕈᑎᑦ ᐊᒻᒪ ᓴᓇᖖᒍᐊᕐᓂᕐᒧᑦ ᓴᓇᕐᕈᑎᑦ | Hardware & Carving Tools

Showing 1–16 of 89 results

  • Woods Polar Cord 10m

    Rated 0 out of 5
    $54.99

    Professional duty. Three conductor/triple grounded outlet. Neoprene jacketed cold weather. Special low temperature plastic moulded ends, suitable to -50 degrees C. SJOW. 13 amp, 125v, 16ga.

  • Sanding Belt 3″ X 18″, 80 Grit

    Rated 0 out of 5
    $3.49

    Aluminum oxide portable and bench stand belts are ideal for all your metal and woodworking applications. Found in a wide variety of grits and sizes, they can be used for tackling projects such as heavy stock removal, finish sanding, deburring of steel, polishing, dimensioning and shaping and removing saw marks.

  • Sanding Sponges 6 Piece Fine/Medium

    Rated 0 out of 5
    $8.99

    Small, flexible sponge for general purpose sanding of a variety of materials. Can be used wet or dry. Coated on all 4 sides. Clog resistant, washable and reusable. Easy to grip.

  • Sanding Belt 4″ X 36″ 120 Grit

    Rated 0 out of 5
    $6.99

    Aluminum oxide portable and bench stand belts are ideal for all your metal and woodworking applications. Found in a wide variety of grits and sizes, they can be used for tackling projects such as heavy stock removal, finish sanding, deburring of steel, polishing, dimensioning and shaping and removing saw marks.

  • Makita 18V Foldable LED Flashlight

    Rated 0 out of 5
    $64.99

    2-mode on/off switch delivers either full brightness (240 lumens, 17 hour illumination) or half brightness (120 lumens, 40 hour illumination). Compact and ergonomic design at only 15″ long. Weighs 2.1 lbs. with battery (battery not included) for reduced operator fatigue. Rubberized soft grip provides increased comfort on the job.

  • Makita 18V Drill/Driver & Impact Kit

    Rated 0 out of 5
    $249.99

    Kick off your cordless collection with the Makita drill/driver & impact kit. The drill/driver (DDF453Z) has a single sleeve keyless drill chuck for easy bit installation/ removal and is compact and lightweight for easy handling. The impact tool (DTD152Z) delivers up to 1460 inch-pounds of torque.

    Dangerous Good – an additional shipping charge may apply to this item.

  • Makita 18V 3.0AH Lithium Battery 2-Pack

    Rated 0 out of 5
    $179.99

    LED charge level indicator display approximately remaining battery power. Optimum charging system utilizes three active controls – current, voltage and temperature to maximize battery life. Built-in memory chip communicates with charge CPU to optimize the charging process based on the unique conditions of the battery. Lithium-Ion battery, 3.0Ah twin pack.

    Dangerous Good – an additional shipping charge may apply to this item.

  • Sanding Belt 4″ X 36″ 80 Grit

    Rated 0 out of 5
    $6.99

    Aluminum oxide portable and bench stand belts are ideal for all your metal and woodworking applications. Found in a wide variety of grits and sizes, they can be used for tackling projects such as heavy stock removal, finish sanding, deburring of steel, polishing, dimensioning and shaping and removing saw marks.

  • DeWalt 20V MAX Variable Speed Die Grinder

    Rated 0 out of 5
    $274.99

    Perform a variety of grinding applications with a variable speed range of up to 25,000 RPM. For ease of use, the handle can be grasped multiple ways with the dual-position rocker switch.

  • King Canada 135 Piece Rotary Tool kit

    Rated 0 out of 5
    $49.99

    Ideal for all your sanding, grinding, sharpening, polishing and cutting needs. 1.1 amp., 120V motor. Variable speed thumb dial (10,000 – 33,000 RPM). Soft non-slip rubber grip housing.

  • DeWalt 6″ 4.0A Bench Grinder

    Rated 0 out of 5
    $199.99

    Induction motor for heavy-duty grinding operations. 5/8 hp/120V AC. Precision-machined aluminum tool rests allow the user to accurately position work.

  • King Canada 6″ 3.5A Bench Grinder

    Rated 0 out of 5
    $89.99

    6″ x 3/4″ Wheel size. 110 volt, 3,500 rpm operation.

  • Milwaukee Cobalt Drill Bit Set 15 piece

    Rated 0 out of 5
    $69.99

    Milwaukee Cobalt RED HELIX Drill Bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35-degree Helix Angle which ends at 15-degrees, the Cobalt bits with RED HELIX provide Rapid Chip Removal limiting heat buildup to Stay Sharper Longer. The 135-degree split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provides up to 10X life vs Black Oxide Drill Bits but can be used in all twist drilling applications.

  • Mibro 5 Piece Masonry Drill Bit Set

    Rated 0 out of 5
    $14.99

    Slow spiral design ensures efficient material removal and allows drills to run cooler. Carbide tips are mechanically positioned to ensure proper drill geometry. Premium brazing material adheres carbide to drill body for maximum durability. Chrome plating adds corrosion resistance, extending bit’s service life. Works in all masonry types, including damp concrete.

  • Wet Sanding Sheets 5 Piece Assorted Grit

    Rated 0 out of 5
    $5.99

    P-graded aluminum oxide abrasive for increased life, fast cut rate, consistent finish. Strong, waterproof C-weight backing is ideal for more aggressive applications; resists chipping and cracking. Good choice for wet, oil or dry sanding primer, sealer, varnish, lacquer, enamel and other top coats.

  • Task 5 Piece SDS Hammer Drill Bit Set

    Rated 0 out of 5
    $39.99
    To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash